MX1105 - HOBO 4-Channel Analog Data Logger
The HOBO MX1105 multi-channel data logger, with four-channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device via Bluetooth Low Energy (BLE) technology. ..
- Brands ONSET
- Product Code: MX1105
- Availability: 7-10 Days
The HOBO MX1105 multi-channel data logger, with four-channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device via Bluetooth Low Energy (BLE) technology.
This self-contained wireless data logger lets you use your mobile device and Onset’s free HOBOmobile® app for iOS to access data, at any time, over a 100-foot range via Bluetooth Low Energy (BLE) technology. You can configure the logger, read out data, view data in graphs, check the operational status of loggers, configure alarm notifications, and share data files – all with no dedicated equipment beyond a mobile device. And if used with the new MX Gateway, you can remotely access your data in Onset’s cloud-based HOBOlink® software.
The MX1105 is ideal for energy audits, building commissioning studies, equipment scheduling, and more.
- BLE communications for wireless data offload
- 16-bit resolution for highly accurate measurements
- Stores 1.9 million measurements for longer deployments between offloads
- New Self-Describing sensors with an automatic configuration for fast deployment
- Compatible with existing sensors for a wide range of indoor monitoring
- Audible and visual LCD-screen alarms notify you if the sensor becomes unplugged or a reading exceeds set thresholds
In what environment does this data logger operate?
This data logger operates in an indoor environment.
What measurements does this data logger support?
The MX1104 data logger supports the following measurements: 4-20mA, AC Current, AC Voltage, Air Velocity, Carbon Dioxide, Compressed Air Flow, DC Current, DC Voltage, Differential Pressure, Gauge Pressure, Kilowatts (kW) and Temperature
For more information visit Onset.
|Full Memory Download Time||Approximately 4 to 15 minutes depending on the mobile device; may take longer the further the device is from the logger|
|LCD||LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range|
|Logger Accuracy||SD-MA-420 or CABLE-4-20mA: ±0.001 mA ±0.2% of reading SD-VOLT-2.5 or CABLE-2.5-STEREO: ±0.1 mV ±0.1% of reading SD-VOLT-05 or CABLE- ADAP5: ±0.2 mV ±0.3% of reading SD-VOLT-10 or CABLE-ADAP10: ±0.4 mV ±0.3% of reading SD-VOLT-24 or CABLE-ADAP24: ±1.0 mV ±0.3% of reading|
|Logger Battery Life||1 year, typical with logging interval of 1 minute and Bluetooth Always On enabled; 2 years, typical with logging interval of 1 minute and Bluetooth Always On disabled; and temperatures between 0° and 50°C (32° and 122°F). Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.|
|Logger Environmental Rating||IP54|
|Logger Measurement Range||SD-MA-420 or CABLE-4-20mA: 0 to 20.1 mA SD-VOLT-2.5 or CABLE-2.5-STEREO: 0 to 2.5 V SD-VOLT-05 or CABLE- ADAP5: 0 to 5.0 V SD-VOLT-10 or CABLE-ADAP10: 0 to 10 V SD-VOLT-24 or CABLE-ADAP24: 0 to 24 V|
|Logger Memory||4 MB (1.9 million measurements, maximum)|
|Logger Operating Range||-20° to 70°C (-4° to 158°F)|
|Logger Radio Power||1 mW (0 dBm)|
|Logger Resolution||SD-MA-420 or CABLE-4-20mA: 0.3 µA SD-VOLT-2.5 or CABLE-2.5-STEREO: 40 µV SD-VOLT-05 or CABLE- ADAP5: 80 µV SD-VOLT-10 or CABLE-ADAP10: 160 µV SD-VOLT-24 or CABLE-ADAP24: 384 µV|
|Logger Size||11.28 cm x 5.41 cm x 2.92 cm (4.44 in. x 2.13 in. x 1.15 in.)|
|Logger Time Accuracy||±1 minute per month at 25°C (77°F)|
|Logger Transmission Range||Approximately 30.5 m (100 ft) line-of-sight|
|Logger Weight||123 g (4.34 oz)|
|Logger Wireless Data Standard||Bluetooth Low Energy (Bluetooth Smart)|
|Logging Modes||Fixed interval (normal, statistics) or burst|
|Logging Rate||1 second to 18 hours|
|Memory Modes||Wrap when full or stop when full|
|Start Modes||Immediate, push-button, date & time, or next interval|
|Stop Modes||When memory full, push button, date & time, or after a set logging period|